HPB CNC E 30 / 300 Press Brake

European built CNC Hydraulic Press Brake

Customer Cancelation Special!

• Bend length: 10' (3100mm)
• Tonnage: 330 US tons
• Delem DA52 CNC Control.
• 3 axis (Y1, Y2, X), ballscrew backguage
• Wila Manual Crowning
• Promecam top tool clamping
• CE Conformity
• Top tool in 835mm lengths
• 220V, 3ph, 60Hz

see our other sizes at: http://www.kaast-usa.com/catalog/27

• Rigid, welded frame of high tensile steel.
• Back gauge system driven by AC servo motors on linear bearings.
• Original BOSCH-REXROTH or HOERBIGER servo hydraulic system.
• User-friendly, moveable and ergonomic control panel incorporating all buttons.
• Tool holding system with quick release.
• Metric / inch work mode.
• Front support arms with T-slot and mm/inch scale.
• Honed hydraulic cylinders & chrome coated pistons.
• Throat depth 400 mm (15.75”).
• Rear light guard.
• Synchronization of Yl +Y2 axis is provided by linear encoders with 0.01mm (0.0004”)tolerances.
• Back gauge fingers move along linear bearings with 0.01mm(0.0004”) tolerances.
• Mechanical bottom table crowning system

Regular price: $89,900

Customer Cancelation Special!   Now only: $69,900