CNC Plasma | CNC Plasma Cutter | CNC Plasma Cutting | CNC Plasma Kits

Plasmasonic

CNC Plasma table with Oxy-fuel cutting head

Large double-gantry CNC plasma table

CNC plasma bevel cutting

This machine is available with a semi-automatic control system for plasma and oxy-fuel cutting.

– One carriage can accommodate two cutters:plasma cutting head and oxy-fuel torch.

– Magnetic holder of cutter heads allows quick change over and preventing damage in case of collision.

– Control system enables installation of up to 4 carriages (with plasma and oxy-fuel cutters and independent height control).

– AC servo drives.

– Ergonomic control panel allows control not only of the machine itself, but also the power source, ventilation systems

CNC control system

– Industrial PC with 17” LCD-display.

– Network card, USB port, disc drive, HDD 80 Gb, keyboard, mouse.

– CNC-program format: ISO ESSI, G– codes, DXF.

– Automatic cutter height control during igniting and piercing.

– Manual or semi-automatic pressure adjustment for plasma and oxy-fuel cutting.

– Manual or semi-automatic adjustment of gas flow for oxy-fuel cutting (torch adjustment).

– Automatic selection and setting of cutting parameters.

– Part rotation.

– Pre-setting of kerf compensation.

– Integrated library of standard parts.

– Operator can create cutting layouts using integrated graphics editor.

	Modern CNC-control with CAD software
	High-end automatic nesting software
	Wide cutting- and cutting shapes library
	Free of charge telephone & remote support service
	Automatic torch height control.
	Look ahead for program blocks for the sharp corners.
	Efficient high speed machining is obtained by not reducing the speed at equal lead in and lead out contours.
	Heavy duty cutting table with preperation for ventilation system
	Stop/continue cutting function
	Micro-joint function to prevent parts falling down
	Working with standard DIN/ISO G Codes possible.
	Possibility of working with .DXF,ESSI and NC toolpath files.
	Overriding all parameters while the machine is working possible.
	Plasma Mode Switch is done easily through the keyboard..
	15 meter/min. cutting speed
	Electro-welded structure.
	Dual side rack, pinion and AC Servo motor on X axis.
	Rack, pinion and AC Servomotor on Y axis.
	Operation & programming manual

	Standard cutting head, 100 Amp. plasma source with manual gas mixing console
	Standard cutting head, 200 Amp. plasma source with manual gas mixing console
	Precision cutting head, 130 Amp. plasma source with automatic gas mixing console and marking function
	Precision cutting head, 260 Amp. plasma source with automatic gas mixing console and marking function
	OXY cutting heads with automatic gas mixing console
	Automatic bevel cutting head
	Automatic pipe- and profile cutting unit
	Ventilation system

Technical specifications	P2010	P3015	P4020	P6020	P12030
Table length	2000 mm	3000 mm (117")	4000 mm (156")	6000 mm (234")	12000 mm (468")
Table width	1000 mm	1500 mm (58")	2000 mm (117")	2000 mm (117")	3000 mm (117")
Cutting speed	up to 7500 mm/min (292"/min)				up to 9800 mm/min (382"/min)
Positioning speed	15000 mm/min (580"/min)
Repeatability	+/- 0.05 mm (0.02")
Positioning accuracy	+/- 0.1 mm (0.04")
Type of arc height control	semi-automatic by arc voltage				Automatic by arc voltage
Control of gas pressure during cutting	semi-automatic				Automatic

Technical specifications of plasmatrons	P100A	P200A	PP130A	PP260A
Low-carbon steels
Cutting thickness	10 mm (0.4")	20 mm (0.8")	16 mm (0.6")	30 mm (1.2")
Max. piercing thickness	15 mm (0.6")	25 mm (1")	25 mm (1")	32 mm (1.2")
Max. thickness (non piercing)	20 mm (0.8")	45 mm (1.7")	38 mm (1.5")	65 mm (2.5")
Stainless steels
max. Cutting thickness	8 mm (0.3")	15 mm (0.6")	12 mm (0.5")	20 mm (0.8")
Max. piercing thickness	12 mm (0.5")	20 mm (0.8")	20 mm (0.8")	25 mm (1")
Max. thickness (non piercing)	15 mm (0.6")	38 mm (1.5")	25 mm (1")	50 mm (2")
Control of gas pressure during cutting	semi-automatic	semi-automatic	Automatic	Automatic
Gases used for plasma cutting	Air	Air	Oxygen, air, nitrogen, F5, H35	Oxygen, Air, nitrogen, F5, H35


	KAAST - YOUR PRODUCTION PARTNER! Chicago: (888) 765-2278 (USA only); +1-224-216-8886 (International)